GameMax Hype Black Mid-Tower ATX Gaming Case With Dual Chamber Panoramic Tempered Glass With 3 x 120mm GameMax Infinity ARGB Fans Inc.

GameMax Hype Black Mid-Tower ATX Gaming Case With Dual Chamber Panoramic Tempered Glass With 3 x 120mm GameMax Infinity ARGB Fans Inc.
GameMax Hype Mid Tower Tempered Glass Black PC Gaming Case
GameMax Hype, Black, Dual Chamber Mid Tower Chassis w/ Tempered Glass, 3x ARGB Fans, USB 3.1 Type-C, ATX / mATX / mITX
Manufacturers Code: GMX-HYPE-BLK
EAN: 6931858778145



GameMax Hype Mid Tower Tempered Glass Black PC Gaming Case



Raise your level with the GameMax Hype Mid-Tower gaming case. This ATX chassis is a high-performance premium product with a distinctive design. Utilising three attractive tempered glass panels providing an uninterrupted, panoramic view of the interior. Show off your high-end gaming hardware thanks to the GPU support.

With three pre-installed GameMax Infinity ARGB Dual-Ring fans this case will keep your gaming PC at optimum temperatures. The Hype has room for up to nine cooling fans and a 360mm liquid cooling radiator at the top, with the dual-chamber design lets you have your all-important hardware on display while keeping your drives, cables and power supply hidden away.

Moving onto the front of the case the I/O panel provides USB3.0 and Type-C connections and inside the Hype we have included the GameMax Version 4.0 PWM ARGB hub with controls for your LED lighting and have access to approximately 368 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.

This completely black interior has huge build potential with a spacious open interior and plenty of cable management to build a powerful dynamic gaming PC. It can fit a graphics card up to 42 centimetres in length, CPU Cooler up to 18.5 centimetres in height and can hold 2 x 2,5 and 2 x 3,5 drives. An ATX power supply unit measuring up to 200mm will fit inside.

Elevate your aesthetic with the Hype and create the ultimate gamers case with its eye-catching design this chassis is a stylish addition to your gaming set-up.

Key Features

Hype In All Black
The GameMax Hype finished in all black and features a 3-piece panoramic tempered glass design with a forty-five-degree viewing angle captures the attention and draws the eye of the viewer into the case. Built for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.

PCIe 4.0 Riser Cable (Sold Separately - CLICK HERE
The latest PCIe 4.0 supports transfer rates of 16 GT/s bit rate, the rate is double of the Gen 3.0, the Gen 4.0 remains backward compatible with a maximum transfer speed offers a great performance and shows off the GPU at a great new angle.

Dual Chamber Layout
Different from traditional computer cases the Hype is designed using a dual chamber layout which provides plenty of space for your hardware, good airflow & ventilation, cable management and guarantees you can create a beautiful build. The dual chamber design allows you to situate your power supply, hard drives and cables in the rear chamber freeing up the main chamber for your fan and radiator mounting points creating an unrestricted view of your components that matter.

Three-Slot Vertical GPU Mount
Vertically display a GPU graphics card, highlight and bring more appeal and aesthetics to your final build thanks to the support for a vertical graphic card layout with a triple PCI-E slots design.

Three Infinity ARGB Dual-Ring Fans Included
Three GameMax Infinity ARGB Dual-Ring fans are pre-installed with a nine-fan blade fan design and equipped with 24 individually controlled Addressable RGB LEDs spilt into two rings (16 + 8 - Outer + Inner) add a stunning finish. Equipped with a rifle bearing motor reducing the noise and making it more efficient.

Stunning Aesthetics
Stand out thanks to mesmerising infinity mirror LED ring effect on the fans you will not be able to take your eyes off it.

Motherboard Software
The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

GameMax V4.0 ARGB PWM Hub
A 9-port ARGB PWM Hub is included inside the Hype with 8-ports available to connect 3 or 4pin cooling fans and 1-port available to connect to a CPU cooler fan. Designed with a magnetic bottom the hub can be installed anywhere inside the chassis to accommodate your build. Prepare for anything with three options of controlling your ARGB, first option is linking the LED or reset switch for manual control, second option is using the included RF remote controller and third option is using Motherboard software with 5V ARGB Aura Sync support.

PWM Intelligent Temperature Control
The GameMax Version 4.0 PWM ARGB hub can be connected to CPU fan interface on your chosen Motherboard to access temperature readings. The Hub adjusts the fans automatically based on the CPU temperature, when getting hotter increasing their speed to swiftly cool it down and when the CPU temperature decreases the fans automatically slow reducing the overall noise.

USB Type-C Port
The GameMax Hype includes a USB Type-C connection and have up to 10Gbps transfer speeds.

Bottom Panel I/O
Puts your connections within easy reach including 1 x USB Type-C and 1 x USB3.0 Ports and a combination audio/microphone jack.

Below are images of how a completed build may look, depending on components you use.
The product on sale is for the case only and does not include any components.

The above images are of how the system may look depending on components used, the product for sale is the case only.

Specifications

Chassis Dimensions (Excluding Fascia / Panels):    (W) 310 x (H) 476 x (D) 425mm
Water Cooling Support:    
Top Supported Radiator(s):    120mm, 240mm and 360mm
Rear Supported Radiator(s):    120mm
Other Supported Radiator(s):    120mm, 240mm and 280mm (Motherboard Plate)
Fan Cooling:    
Additional Fan Support:    Space For 2 x 120mm or 2 x 140mm Fans (On M/B Cover - 2 x GameMax Infinity 120mm ARGB Dual-Ring Fans Included)
3 x GameMax Infinity 120mm ARGB Dual-Ring Fans Included:    
Fans Powered Via:    4pin PWM
Fans LEDs Powered Via:    3pin AURA
Fan Controller Support:    
Fan Controller Included:    Yes
Fan Controller Power Via:    SATA Connector
LED Controller :    Yes
Fan Power Connector:    4pin PWM or 3pin
LED Power Connector:    3pin AURA
Fan Control Via:    RF Remote / Reset Button (If Connected)
ARGB Device Supported Qty:    9
CPU Cooler Connector Qty:    1
Fan Connectors Qty:    8
Additional Chassis Specifications:    
Expansion Slots:    7 x Full Size (Horizontal) and 3 x Full Size (Vertical)
Audio Support:    HD (Combo Port)
PSU Max. Length:    200mm
PSU Location:    Rear Right
Packaging Type :    EPE Foam

Case Specifications

Form Factor:    Midi Tower
Motherboard Support:    ATX, Micro ATX, Mini ITX
PSU Support:    Standard ATX
PSU Location:    Bottom
Gaming Case:    Yes
Water Cooling:    Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Top
Body Material:    1.07mmSPCC
Front Bezel Material:    Tempered Glass
Side Panel:    Tempered Glass
Internal Cable Management Depth:    53mm
External Bays:    
Internal Bays:    2 x 3.5” Internal
2 x 2.5” Internal
Drive Bay Notes:    
Expansion Slots:    10 x Full Size
Cooling Front:    None
Cooling Top:    Space For 3 x 120mm Fans
Cooling Rear:    Space For 1 x 120mm Fan (1 x GameMax Infinity 120mm ARGB Dual-Ring Fan Included)
Cooling Side:    Space For 2 x 120mm or 2 x 140mm Fans (2 x Infinity 120mm ARGB Dual-Ring Fans Included)
Cooling Bottom:    Space For 3 x 120mm Fans
Fan Controllers:    1 Fan Controllers, controlling up to
8 fans in total
IO Ports:    1 x USB 3.1 Type C
1 x USB 3.0
1 x HD Audio
1 x Microphone
GPU Max Length:    420mm
CPU Cooler Maximum Height:    185mm
Front Bezel Colour:    Black / Glass
Body Colour:    Black
System Cabinet Features:    
PSU Included:    No

General Specifications

Manufacturer Part Number:    GMX-HYPE-BLK
EAN Number:    6931858778145
Has Mains Plug:    No
Colour:    Black
What's In The Box:    Case
Accessories
V4.0 PWM ARGB Hub
GPU Support
PCI Riser Card Bracket
Manual
Unit (Product) Dimensions (mm):    310mm x 476mm x 425mm (W x H x D)
Packaging Dimensions (mm):    537mm x 412mm x 530mm (W x H x D)