HYTE Y60 White / Black 3 Piece Tempered Glass Dual Chamber Mid-Tower ATX Case

HYTE Y60 White / Black 3 Piece Tempered Glass Dual Chamber Mid-Tower ATX Case
HYTE Y60 Dual Chamber Mid-Tower Gaming ATX Case - White / Black
HYTE Y60 Case, Black / White, Mid Tower Chassis w/ Tempered Glass Windows, 3x 120mm Flow FE12 Fan, USB 3.2 Type-C, ATX / mATX / mITX
Manufacturers Code: CS-HYTE-Y60-BW
EAN: 1220000350113



Elevate your aesthetic with the HYTE Y60 Mid-Tower Case. This ATX case utilises three tempered glass panels, providing an uninterrupted, panoramic view of the interior. You can truly show off your high-end gaming hardware, thanks to the vertical GPU mount and included PCIe 4.0 riser cable. Plus, with three pre-installed Flow FE12 fans and cold floor cooling, this case will keep your gaming PC at optimum temperatures. With “crown moulding” along the top and bottom of the chassis, the HYTE Y60 is a stylish addition to your gaming set-up.



HYTE Y60 Dual-Chamber Mid-Tower PC Case at a Glance:

ATX case with bezel-less 3-piece panoramic tempered glass panelling
PCIe 4.0 riser cable included for vertical GPU mounting
Protective riser cable canopy for half-height PCIe cards behind vertical GPU
Cold floor cooling utilising sweeping vents – eliminates hot spots
Three pre-installed Flow FE12 fans on floor and rear of case
Dual-chamber design for intelligent cable management

Modern Aesthetics

With your gaming PC inside a HYTE Y60 PC Case, you can achieve the peak modern aesthetic. The three-piece glass panelling offers a panoramic view of all your high-end hardware, with no bezels or framework interrupting their glory. What’s more, the intelligent interior layout makes it seem like your components are floating, for that extra touch of style.

The HYTE Y60 is available in four stunning colourways: Black, White, Red, and Snow White. This model is White, with a white finish on the exterior and black internal framework. A bold addition to any gaming set-up.

Built to Showcase

As a showcase chassis, the HYTE Y60 has extensive support for a wide range of components, enabling you to build your dream PC. The backplate can accommodate Mini-ITX, Micro-ATX, ATX, and even E-ATX motherboards, with three full and seven half-height expansion slots for all your PCIe devices. Included within the scope of delivery is a PCIe 4.0 riser cable that allows you to vertically mount your GPU and features a protective canopy so you can mount half-height PCIe cards behind the GPU. There is 375mm clearance for graphics cards, at a maximum thickness of 75mm, though 60mm is recommended for the best cooling potential.

To power your gaming PC, the HYTE Y60 has space for ATX power supplies, up to 235mm in length. Facilitating flexible storage, this chassis can hold either two 3.5” HDDs or four 2.5” SSDs.

Cooler Than a Partly Cloudy Day with a Light Breeze

The HYTE Y60 PC Case has been optimised to provide excellent cooling. To eliminate hot spots, it features cold floor cooling, with sweeping lateral vents integrated in the bottom of the chassis. Plus, with extensive ventilation throughout the frame and three pre-installed 120mm fans, the HYTE Y60 has a unique airflow path that will provide ample cooling to a wide variety of components.

The featured fans are Flow FE12 fans, that can operate at speeds of 1300RPM whilst at whisper-quiet noise levels. Thanks to their fluid dynamic bearing, these fans are highly durable with a long lifespan. Two are mounted on the bottom panel and the third is on the rear.

There is further fan and radiator support on the HYTE Y60. In the space next to the motherboard, you can mount either two 120mm or 140mm fans. Alternatively, this can be used for radiators up to 280mm long and 150mm thick. The top panel accommodates for either three 120mm fans or a radiator up to 360mm and 80mm thick. The bottom panel can alternatively hold two 140mm fans, whilst the rear supports a single 120mm fan or radiator.

For cooling your CPU, there is clearance for units up to 160mm tall. It is advised that if you use an air cooler that you should install two extra intake fans.

Dual-Chamber Design

The HYTE Y60 implements a dual-chamber design, providing a dedicated space for cable management. This enables cleaner cable runs and prevents wiring from cluttering your gaming PC, thus impeding airflow.

The front I/O is located on the angled panel of the chassis, fully taking advantage of this stunning shape. Providing high-speed connectivity, there is two USB 3.0, one USB 3.2 Gen 2 Type-C ports, and a 3.5mm audio jack, symmetrically surrounding the power button.

Specifications:

Type     Dual Chamber Mid-Tower ATX Case
Volume     60L
Case Dimensions     456mm (L) x 285mm (W) x 462mm (H)
Case Materials     Tempered Glass, Steel, ABS
Colour     White / Black
Motherboard Support     EATX, ATX, mATX, ITX
Power Supply     ATX up to 235mm in length
Video Card Max Dimensions     375mm length, 75mm thick (60mm or less recommended for best cooling
Fan Support     Side: 2x 120/140mm
Top: 3x 120mm
Rear: 1x 120mm (1x 120mm, 1300 RPM included)
Bottom: 2x 120mm/140mm (2x 120mm, 1300 RPM included)
Radiator Support     Side: 120, 140, 240, 280mm up to 150mm thick
Top: 120, 240, 360mm up to 28mm thick
Rear: 120mm
CPU Cooler Height     160 mm
Storage     2x 3.5" HDD or 4x 2.5" SSD
Expansion Slots     3 + 6 half-height
PCI Express Riser     4.0 x 16 (included)
Front I/O     USB 3.0 x 2
USB 3.2 Gen 2 Type-C x 1
Audio/Mic Jack x 1
Dust Filters     Bottom/Side/Top