Kingston 8GB, DDR3, 1600MHz SODIMM Memory - Low Voltage 1.35V - KVR16LS11/8

Kingston 8GB, DDR3, 1600MHz (PC3-12800), CL11, SODIMM Memory, *Low Voltage 1.35V*
KVR16LS11/8 Kingston LOW VOLTAGE 8GB SODIMM DDR3
Manufacturers Code: KVR16LS11/8
EAN: 0740617219791

8GB 2Rx8 1G x 64-Bit PC3L-12800 CL11 204-Pin SODIMM

ValueRAM's 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low voltage, memory module, based on sixteen 512M x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V.
This 204-pin SODIMM uses gold contact fingers.

Features
 
• JEDEC standard 1.35V (1.28V - 1.45V) and 1.5V (1.425V - 1.575V) Power Supply
• VDDQ = 1.35V (1.28V - 1.45V) and 1.5V (1.425V - 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component

Specification:

Series: Kingston ValueRAM
Type: SODIMM DDR3
Size: 8GB
Speed: 1600 MHz
Compliance: PC3-12800
Pins: 204-pin
CAS Latency: CL11
Data Integrity Check: Non-ECC
Advanced Features:
Low Voltage: 1.35V
Unbuffered
Package Type: Blister Pack
Package Weight: 0.0690 kg
Warranty: Lifetime