CiT Luna Black Micro-ATX PC Gaming Case with 4 x 120mm Infinity ARGB Fans Included 1 x 4-Port Fan Hub Tempered Glass Side Panel

CiT Luna Black Micro-ATX PC Gaming Case with 4 x 120mm Infinity ARGB Fans Included 1 x 4-Port Fan Hub Tempered Glass Side Panel
CiT Luna, Black, MicroATX Chassis w/ Tempered Glass Window, 4x 120mm ARGB Fans, Micro ATX, Mini-ITX
CiT Luna Black Tempered Glass Micro ATX Case
Manufacturers Code: CIT-LUNA-BLK
EAN: 5055492413611

CiT Luna Black Gaming Case with 4 x Infinity ARGB Fans



The Luna from CiT is an exceptional Micro-ATX available in a black or white edition, this impressive chassis has a full-mesh front panel designed for improved airflow and has a smart range of features that will keep your gaming PC cool and quiet.

The CiT Luna is a Micro-ATX gaming case, a prominent feature, the mesh front panel, allows for large volumes of air to pass through unrestricted. To enhance the airflow even further the case features four pre-installed ARGB Infinity fans, three behind the mesh front panel and one rear fan, with the option to install up to a total of six fans to direct and boost the natural airflow providing the best system performance. Alternatively, the Luna can support a 280mm radiator at the front and a 240mm at the top of the chassis.

Moving onto the top of the case the I/O panel provides USB2.0 and USB3.0 connections as well as controls for your LED lighting and a tempered glass panel finishes off the design of the Luna nicely.

Using the LED button have access to approximately 13 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.

This completely black interior for a small case supports plenty of space and powerful hardware. It can fit a graphics card up to 30 centimetres in length and can hold 4 x 2,5 and 2 x 3,5 drives. An ATX power supply unit measuring up to 170mm will fit inside.

Featuring a modern sleek design, the mesh front panel not only provides phenomenal airflow but also is perfect at displaying the ARGB lighting, drawn to what is important makes the CiT Luna one of the most cooling-orientated gaming cases and if you are looking to create a high-airflow ARGB showstopper.

Key Features

Mesh Micro-ATX Gaming Case
The CiT Luna finished in all black features a metal front panel designed with ultra-fine mesh allows air to flow into the case easily without obstruction combining a super airflow performance with dust filtration.

ARGB Infinity Fans Included
4 x 120mm ARGB Infinity fans are included with a nine-fin blade fan design and equipped with 8 LEDs adds a stunning finish. The rear fan generating 23.8dBA for a quieter cooling performance.

Stunning Aesthetics
Stand out thanks to mesmerising infinity mirror LED ring effect on the fans you will not be able to take your eyes off it.

Air Cooling
Cool your system effectively with four fans included and the Luna offers enough space to house six fans in total Front: 3 x 120mm or 2 x 140mm Fans, Top: 2 x 120mm Fans & Rear: 1 x 120mm Fan. The Micro-ATX casing can also house a 280mm radiator at the front or a 240mm radiator at the top.

ARGB Hub
A 4-port ARGB Hub is included to control all the ARGB Infinity Fans included with the Luna. There are 4 x daisy-chain direct connections to sync any extra ARGB components to your build. You can still control the ARGB fan LEDs manually using the LED button on the top of the I/O, powered by SATA, with which you have access to 13 LED modes.

Motherboard Software
The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

Tempered Glass Panel
The solid tempered glass side panel offers an excellent view of the interior specifically of the Micro-ATX Motherboard.

Micro-ATX Housing
Mini-ITX and Micro-ATX Motherboards are compatible and graphics cards up to 300mm in length and CPU cooler up to 160mm in height, there is adequate space for mainstream hardware to build a high-powered PC Gaming case.

Specifications

Chassis Dimensions (Excluding Fascia / Panels):    (W) 200 x (H) 411 x (D) 330mm
Water Cooling Support:    
Front Supported Radiator(s):    120mm, 240mm and 280mm
Top Supported Radiator(s):    120mm and 240mm
Rear Supported Radiator(s):    120mm
4 x ARGB Infinity Fans Included:    
Fans Powered Via:    3pin Fan Connector
Fans LEDs Powered Via:    3pin AURA
Fan Controller Support:    
Fan Controller Included:    Yes
Fan Controller Power Via:    SATA Connector
LED Controller:    Yes
Fan Power Connector:    3pin Fan Connector
LED Power Connector:    3pin AURA
Fan Control Via:    LED Button / MB Sync
Supported Qty of Fans (Max.):    4
Supported Qty of LEDs (Max.):    4 Plus 2 LED Strips
Additional Chassis Specifications:    
PSU Max. Length:    170mm
Packaging Type:    EPE Foam
Packaging Thickness:    24.72mm

Case Specifications

Form Factor:    Micro ATX
Motherboard Support:    Micro ATX, Mini ITX
PSU Support:    Standard ATX
PSU Location:    Bottom
Gaming Case:    Yes
Water Cooling:    Water Cooling Ready!
Supported Radiator Size: 280mm
Supported Radiator Positions: Front, Top
Body Material:    0.55mmSPCC
Front Bezel Material:    ABS & Mesh
Side Panel:    Tempered Glass
Internal Cable Management Depth:    17mm
External Bays:    
Internal Bays:    2 x 3.5” Internal
4 x 2.5” Internal
Drive Bay Notes:    2 x 2.5" shared with 3.5"
Expansion Slots:    4 x Full Size
Cooling Front:    Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mm ARGB Infinity Centre Fans Included)
Cooling Top:    Space For 2 x 120mm Fans
Cooling Rear:    Space For 1 x 120mm Fan (1 x 120mm ARGB Infinity Centre Fan Included)
Cooling Side:    None
Cooling Bottom:    None
Fan Controllers:    1 Fan Controllers, controlling up to
4 fans in total
IO Ports:    1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length:    300mm
CPU Cooler Maximum Height:    160mm
Front Bezel Colour:    Black
Body Colour:    Black
System Cabinet Features:    
PSU Included:    No

General Specifications

Manufacturer Part Number:    CIT-LUNA-BLK
EAN Number:    5055492413611
Has Mains Plug:    No
Colour:    Black
What's In The Box:    Case
Manual
Cable Ties
Screws
Unit (Product) Dimensions (mm):    200mm x 427mm x 366mm (W x H x D)
Packaging Dimensions (mm):    264mm x 445mm x 470mm (W x H x D)
Net Weight (KGs):    4.1 KGs
Gross Weight (KGs):    4.9 KGs