CiT Level 2 WHITE Micro-ATX Mesh Front PC Gaming Case with 3x RGB Fans, Tempered Glass Side

CiT Level 2 WHITE Micro-ATX Mesh Front PC Gaming Case with 3x RGB Fans, Tempered Glass Side
CiT Level 2 White Micro-ATX Mesh PC Gaming Case with 3 x 120mm RGB Rainbow Fans Included With Tempered Glass Side Panel
CiT Level 2 White Micro-ATX Mesh Front PC Gaming Case
Manufacturers Code: CIT-LEVEL2-MW
EAN: 5055492413581



The Level 2 is a Micro-ATX chassis designed with style and purpose while occupying minimal desk space with its smaller footprint.

The Level 2 includes a mesh front panel allows for large volumes of air to pass through unrestricted. To enhance the airflow even further the case features two pre-installed fans, the air intake is maximised to its maximum potential and with the possibility to mount additional fans and radiators, this is a high quality Micro-ATX where not an inch of space goes to waste.

Three 120mm RGB rainbow fans catch the eye with stunning colour modes on offer at the touch of a button not only make the Level 2 stand out but ensures all important components are catered for when it comes to keeping temperatures balanced and conditions optimised for a peak performance.

Moving onto the top of the case the I/O panel provides USB2.0 and USB3.0 connections as well as controls for your LED lighting using the LED button have access to approximately 14 LED modes and a tempered glass panel showcases your build setup.

Measuring 40.7 centimetres in height, the interior painted in all white with a full PSU shroud that adds to the sleek and unobtrusive look. Space to install a M-ATX or Mini-ITX motherboard and for a small surface area there is still has plenty of space to install powerful hardware. It can fit a graphics card up to 33 centimetres in length and behind the motherboard and PSU shroud users will find space for 3 x 2,5 and 2 x 3,5 drives. Underneath the case is a removable dust filter suitable for an ATX power supply unit measuring up to 160mm will fit inside.

The Level 2 is a small stylish Micro with an iconic look not only provides exceptional airflow but also is perfect at displaying the ARGB lighting. The Level 2 carries some serious power, creating a stunning look and functional gaming PC.



Key Features

Mesh Micro-ATX Gaming Case
The CiT Level 2 is a bold and sophisticated gaming case finished in all white with a mesh front panel allows air to flow into the case easily without obstruction combining a super airflow performance with dust filtration, makes this stylish chassis both comfortable in a state-of-the-art office and gaming room.

RGB Rainbow LED Fans Included
Three RGB Rainbow fans with a nine-fin blade fan design and equipped with 8 LEDs adds a stunning finish. The rear fan generating 24.6dBA for a quieter cooling performance.

Air Cooling
Cool your system effectively with three fans included and the Level 2 offers enough space to house seven fans in total Front: 2 x 120mm or 2 x 140mm Fans, Top: 2 x 120mm or 2 x 140mm Fans, PSU Shroud: 2 x 120mm fans & Rear: 1 x 120mm Fan. The Micro-ATX casing can also house a 280mm radiator at the top.

Manual Control
Control the three fans manually with just a single press of the LED button on the top of the I/O, connect the LED button and powered using SATA have access to approximately 14 LED modes.

Tempered Glass Panel
The solid tempered glass side panel offers an excellent view of the interior specifically of the Micro-ATX Motherboard.

Micro-ATX Housing
Mini-ITX and Micro-ATX Motherboards are compatible and graphics cards up to 330mm in length and CPU cooler up to 180mm in height, there is adequate space for mainstream hardware to build a high-powered PC Gaming case.

Dust Filter
One removable dust filter help keeps the dust out of your gaming PC and enhances the cooling performance even further, they are easy to remove which makes them easy to clean.

Specifications

Chassis Dimensions (Excluding Fascia / Panels):    (W) 216 x (H) 386 x (D) 337mm
Water Cooling Support:    
Front Supported Radiator(s):    120mm and 240mm
Top Supported Radiator(s):    120mm, 240mm and 280mm
Rear Supported Radiator(s):    120mm
RGB Rainbow Fans Included:    
Front Fan Powered Via:    Slave Fan - 4pin Proprietary
Front Fan LEDs Powered Via:    Slave Fan - 4pin Proprietary
Rear Fan Powered Via:    Master Fan - SATA
Rear Fan LEDs Powered Via:    Master Fan - SATA
General Specifications:    
General Specifications:    160mm

Case Specifications

Form Factor:    Micro ATX
Motherboard Support:    Micro ATX, Mini ITX
PSU Support:    Standard ATX
PSU Location:    Bottom
Gaming Case:    Yes
Water Cooling:    Water Cooling Ready!
Supported Radiator Size: 280mm
Supported Radiator Positions: Front, Top
Body Material:    0.6mmSPCC
Front Bezel Material:    ABS & Mesh
Side Panel:    Tempered Glass
Internal Cable Management Depth:    17mm
External Bays:    
Internal Bays:    2 x 3.5” Internal
3 x 2.5” Internal
Drive Bay Notes:    1 x 2.5" Shared with 3.5"
Expansion Slots:    4 x Full Size
Cooling Front:    Space For 2 x 120mm or 2 x 140mm Fans (2 x 120mm RGB Rainbow Fans Included)
Cooling Top:    Space For 2 x 120mm or 2 x 140mm Fans
Cooling Rear:    Space For 1 x 120mm Fan (1 x 120mm RGB Rainbow Fan Included)
Cooling Side:    None
Cooling Bottom:    Space For 2 x 120mm Fans
Fan Controllers:    0 Fan Controllers, controlling up to
0 fans in total
IO Ports:    1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length:    330mm
CPU Cooler Maximum Height:    165mm
Front Bezel Colour:    White / Mesh
Body Colour:    White
System Cabinet Features:    
PSU Included:    No

General Specifications

Manufacturer Part Number:    CIT-LEVEL2-MW
EAN Number:    5055492413581
Has Mains Plug:    No
Colour:    White
What's In The Box:    Case
Accessory Pack
Manual
Unit (Product) Dimensions (mm):    216mm x 407mm x 369mm (W x H x D)
Packaging Dimensions (mm):    280mm x 435mm x 460mm (W x H x D)
Net Weight (KGs):    4.2 KGs
Gross Weight (KGs):    5 KGs