Arctic Freezer 7 X CO Compact Intel / AMD CPU Cooler

Arctic Freezer 7 X CO Compact Intel / AMD CPU Cooler
Arctic Freezer 7 X CO Compact Heatsink & Fan - ACFRE00085A
Arctic Freezer 7 X CO Compact Heatsink & Fan, Intel & AMD Sockets, Continuous Operation, Dual Ball Bearing
Manufacturers Code: ACFRE00085A
EAN: 4895213702485



Compact Multi-Compatible CPU Cooler for Continuous Operation



Compatible with Intel & AMD sockets
Pre-applied MX-2 thermal paste
Extra long life span thanks to dual ball bearing and low motor temperature
Lower power consumption and less vibration with new motor technology
Offset heat pipes ensure optimal heat dissipation

The ARCTIC Freezer 7 X CO is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due to its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was able to significantly improve the Freezer 7 X CO cooling performance.

Compatible with Intel & AMD Sockets
The Freezer 7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

Pre-applied MX-2 Thermal Paste
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan thanks to its Low Motor Temperature
The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.

Offset Heat Pipes enable Optimal Heat Dissipation
The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

10 % More Cooling Capacity with Freezer 7 X CO
The ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

More Efficienct and Whisper Quiet
In addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.

P-fan for Increased Performance
Inspired by the P-series, the Freezer 7 X CO fan benefits from all of the advantages of P-fans:

High static pressure for increased cooling performance
Broad RPM range
Lower power consumption
Less vibration
PWM for synchronous fan control

Double Ball Bearing Constructed for Continuous Operation
The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

Offset Heat Pipes enable Optimal Heat Dissipation
The Freezer 7 X CO uses direct-touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Specification:

Edition     Freezer 7 X CO
Cooler Form Factor     Single Tower
Heatpipes     2
Cooler Features     

Aluminium Fins
Copper Heatpipes
Direct Contact Heatpipes

Socket Compatibility     

1150
1151
1155
1156
1200
775
AM3+
AM4
AM5
FM1
FM2+

Fan Specifications
Included Fan Configuration     1 x 92mm
Fan Edition     Arctic P-Series
PWM Fan     Yes
Fan Bearing Type     Dual Ball Bearing
Fan Colour     Black/Grey
LED Lighting     N/A
Fan/Pump Connectors     1 x 4-pin
Max. Fan Speed     2,000 rpm
Max. Fan Airflow     
Max. Air Pressure     
Max. Sound Level     24.5 dBA

Materials
Cooler Materials     Aluminium / Copper
Included TIM (Thermal Interface Material)     Arctic MX-2 (Pre-Applied)

Dimensions & Weight
Heatsink/Radiator Dimensions     
Total Dimensions     110.5 x 132.5 x 74.3 mm (WxHxD)
Model Number     ACFRE00085A
GTIN     4895213702485