Game Max 1050 Watt 80 PLUS Gold Fully Modular RGB LED PSU / Power Supply

Be the first to review this product

1050w Power
Full modular output
80+ Gold APFC, High-Efficiency and 90+ Certified.
Active Power Factor rate up to 0.9.
RGB Ring Fan on the top
RGB Illuminated logo
Honeycomb ventilation design for optimal heat dissipation.

View Full Description
Quickfind Code: Q3372 | Digitalpromo Code: GMRGB1050-PR14

Availability: In stock

£99.99

£114.99 Save £15.00

Order within 2 hours and 49 minutes for delivery on Tuesday, 20th August

Restrictions apply (Delivery information)
Click here to view reviews of this product from other customers.
Customers Who Bought This Item Also Bought select all

Game Max 1050 Watt 80 PLUS Gold Fully Modular RGB LED PSU / Power Supply
1050W Game Max RGB Series, Full Modular, 80 PLUS Gold, SLI/CrossFire, Single Rail, 80A, 140mm RGB Fan, RGB Logo, ATX PSU
Game Max 1050W Modular RGB Fully Modular Gold 80 Plus 14cm RGB Fan & Illuminated Logo
Manufacturers Code:     RGB-1050
EAN: 6931858766036

Game Max RGB series power supply offers Value and Performance. They are the most suitable for cost/performance ratio and is the best choice for a system builder. The 12V CPU power and modern PCIe 6 + 2 Pin connectors are ready for high-end gaming systems. There is full electrical protection and official safety and also the quality promise by Game Max.

RGB Modes operation instructions:

1. With the memory function, turn on the power supply again the initial state is the same as the state of when the PSU was turned off.

2. Press the RGB controller switch successively, the lights change to be Red, Blue, Green, White, Yellow and Purple, breathing lights and the colours can mix mode in turn.

3. Breathing light mode: Make the lights bright gradually in two seconds, make the lights dim gradually in two seconds, play cycle from white colour to purple colour.

4. Colour mix mode: the lights change from white to purple colour in turn and keep 0.5 Seconds at the peak of each colour and it takes 4 Seconds between the two colours.

5. In any mode, press the RGB controller switch for three seconds, the lights go out.

Key Features

Powerful single +12V rails offers stable DC output and supports high-end graphic cards and PC systems.
80+ Gold APFC, High-Efficiency and 90+ Certified.
Active Power Factor rate up to 0.9.
RGB Ring Fan on the top, RGB Illuminated logo on the side and the lights are coming from the top and side. The Colours include: Red, Blue, Green, White, Yellow and Purple.
Honeycomb ventilation design for optimal heat dissipation.
Full modular output connector.




Detailed Specifications

Dimensions:    150mm x 85mm x 165mm (W x H x D)
Input Voltage:    100-240 VAC
Input Current:    6A/12A
Input Frequency Range:    50-60Hz
PFC:    Active PFC (>.99)
Power Good Signal:    100-500 ms
Hold Up Time:    >17ms
Efficiency:    >88%
MTBF:    100,000 Hours
Protection:    OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP
Power:    1050W
Operation Temperature:    0-40°C (Nominal Input Voltage)
Safety:    CE / FCC / CB
Cooling:    140mm Ultra Silent Fan
Noise:    < 17 dBA
80 Plus Certified:    Yes - 80 Plus Gold

General Specifications

Manufacturer Part Number:    RGB-1050
EAN Number:    6931858766036
Has Mains Plug:    No
Colour:    Black
What's In The Box:    Power Supply
Screws
Unit (Product) Dimensions (mm):    150mm x 85mm x 165mm (W x H x D)

 

 

12v Connector 4+4 Pin

Questions:

There are no product questions yet.

Please login to your account to post a question

Be the first to review this product

Write Your Own Review

Please login or register to leave a review.

Leave a comment

Back to top